AC
HS M1 M2
1
E
4x4
B
7
B
x2
3
2
B
x22
D
B
x2
B
7
7
B
6
7
8
1
2
6
5
Loosen
Adjust
Tighten
Stick the adhesive pad(D)
Attach the hand Switch (7)
to the bottom of tabletop
Tabletop
STEP 4
STEP 5
Please choose a proper position according to
actual circumstance.
Attention
Attach the hand Switch (7)
to the bottom of tabletop
Attach the Control box (6)
to the bottom of tabletop
Install the Tabletop
Install the Control Box(6) and the Hand Switch(7)
Attention
The control box (6) can be attached to the cable management
tray (5) or the tabletop as shown. However, if you use
CB38M2A(IB) control box, it has to install to the tabletop only.
Otherwise, the anti-collision system will not work well.
STEP 6
Connect the cables to the control box (6) as shown in the diagram below.
Port for
hand switch
Power port
Port for cable
connected to the
lifting column
STEP 7
Slide the plate
Tighten the screw
Install the cable management tray
Common fault treatment
The following tips will help you detected and eliminate the common fault
and error.If the fault you met is not listed below, please contact with your
supplier. Only themanufacturer and professionals are capable for investigating
and correcting those fault and error.
Fault phenomenon
Method
No response while long pressing
down arrow after connected with
a power supply
1.Check if all the cables be connected well
1.Check if all the cables be connected well
2.Contact your supplier or dealer
2.Contact your supplier or dealer
No response while pressing up
arrow/ down arrow after
connected with a power supply
Rising in a low speed
1
.
Check if overloaded, max loading: 100kg
;
1
.
Check if overloaded, max loading: 100kg
;
1
.
Check if overloaded, max loading: 100kg
;
2
.
Contact your supplier or dealer
2
.
Contact your supplier or dealer
2
.
Contact your supplier or dealer
The motor not move as instructed
1. Contact your supplier or dealer
1.Reposition
2.Contact your supplier or dealer
Go down but not go up
Downward sliding
Frequently Reposition
Overwork
（
Duty cycle
:
Max 2min on/18min OFF
）
1
.
Restart after suspend for 18mins while
connecting with power;
2
.
Contact your supplier or dealer;
1. Press "M"and "3" together for 3 seconds or
more, after hearing continuous beeping for twice,
it will restore factory settings
Not enough up&down height
2.Contact your supplier or dealer
Attention
1. Power supply: AC100V
-
240V,50/60Hz
2. Service Environment: 0-40
℃
3. Unplug the power plug before cleaning, wipe the dust on surface with slight wet
dishcloth when cleaning, be careful not to let the drops into the internal parts, not loose
the connector.
4. The electric box contains electronic components, metals, plastics, wires etc., so
dispose of it in accordance with each country's environmental legislation, not the
general household waste.
5. Check carefully to ensure correct and complete assembly before using.
6. Be familiar with all functions and program settings of the product before first use.
7. Children are forbidden to play on the product because of unforeseen action when
playing, so any dangerous consequences caused by this improper action will not be on
8. Slight noise caused by the V-ribbed belt or brake system due to structure will not
have any effect on the use of the equipment.
9. Corrosive or abrasive materials are forbidden to clean the equipment. Must ensure
that the cleaner used will not pollute the environment.
10. This appliance can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved. Children shall not play
with the appliance.
11. Cleaning and user maintenance shall not be made by children without supervision.
12. If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or a similarly qualified person in order to avoid a hazard.
13. Please make sure there is no hazard sources in your operating environment. e.g.,
do not litter the tools around. Always be careful to treat the packaging materials in order
to avoid any possible danger, e.g. plastic bag may lead to choking hazard to children.
14. Keep the original package of the equipment if necessary in case of the future use in
transportation.
Waste disposal
This marking indicates that this product should
not be disposed with other household wastes.
To prevent possible harm to the environment or
human health from uncontrolled waste disposal,
recycle it responsibly to promote the sustainable
reuse of material resources. To return your used
device, please use the return and collection
systems or contact the retailer where the
product was purchased. They can take this
product for environmental safe recycling.
