Step 4:
Install support plates
Attach the support plates (6) to the lifting columns (3 & 4) using M6 bolts (B). Tighten with 5x5
hex key (F).
Step 5:
Connect desktops, Install adapter holder, desktop, and keypad
05
06
B
X4
F
5 5
x
6
F
B
3
4
H
X3
1
2
H
Connect the small desk top (1) with large desk top (2) using wooden pins (H).
E
X12
D
X2
D
1
2
11
7
，
E
Put the frame upside down on the underside of the desktop. Attach the adapter holder (11) to
the crossbeam (7). Attach the frame to the desk top using screws (E), Attach the keypad (13)
to the desk top using screws (D).
Note: the holes in the adaptor
holder (11) are not for screws.
The pre-drilled holes in the
desktop are just for your
reference.
