Step 6-2: Install the desktop, control box and handset
Installation of right-return desktop
E
x6
D
x6
F
X18
F
X18
Step 6-1: Install the desktop, control box and handset
Use cable ties (E) to fix
the cables on the table,
or use screws (D) to fix
the cable ties (E) to
keep the cables tidy.
Installation of left-return desktop
The installation method is the same as step 6-1
03
04
C
x8
G
4x4
C
G
3
1
2
Connect the desk feet (2) (3) and the
desk frames (1) with screws (C ), and
tighten them with a wrench (G).
Step 2: Install desk frames
B
x8
G
4x4
Use screws (B) to connect the table legs (1)
with the support beams (4) (5), and tighten
them with a wrench (G).
5
B
G
1
4
9
10
5
A
G
7
6
4
A
x4
G
4x4
Step 4: Install the support plate
Connect the support plate (6) (7) and the support
beam (4) with screws (A), and tighten them with a
wrench (G).
AC
HS M1 M2 DC
Step 5: Install the handset and control box
Handset
Power port
Port for cable
connected to
the lifting column
Step 3: Install desk feet
11
5
11
5
E
x6
D
x6
Use cable ties (E) to fix
the cables on the table,
or use screws (D) to fix
the cable ties (E) to
keep the cables tidy.
Rip
Embedded wire
Fixed
Rip
Embedded wire
Fixed
The control box must be properly placed
outside the beam underneath the desktop.
The stretch distance of the support beam can
be adjusted as needed to suit your needs.
Attach both desktops to the table frame with screws(F), and
secure the joints and desktop plate connectors(11) with
screws (12).The control box (5) attaches below the desktop
with screws (F), and the keypad(9) attaches to the desktop.
The stretch distance of the support beam can
be adjusted as needed to suit your needs.
Attach both desktops to the table frame with screws(F), and
secure the joints and desktop plate connectors(11) with
screws (12).The control box (5) attaches below the desktop
with screws (F), and the keypad(9) attaches to the desktop.
The control box must be properly placed
outside the beam underneath the desktop.
F
9
11
12
F
9
