2. Ensure that the wire rope is evenly wound
around the axle. If cables do not wind evenly, be
sure that all wires are under equal tension while
the frame is suspended.
09
10
Step 9: Install Hand Crank and Winding Pole
x1
C
G
3x3
C
2
3
1
C
1
2
G
2
Safety Reminder
1
Power Drill
2
Safety Lock
1. Before using this product, use the
winding pole (2) to pull out safety lock
on the gear box, push inward to lock
after use.
For your safety, do not park a car or walk directly
under the product for at least 1 hour, to be sure
that the unit is installed correctly. Never play on
or around the product.
Wrong
Place the winding pole (2) through loop on the
gear drive (3), then fix the hand crank (1) to the
bottom of the winding pole (2) with screws (C).
Note: the winding pole can be operated either
with the included hand crank (1) or with a
power drill (drill not included).
Mark the mounting hole.
1
2
3
4
Wooden Ceiling Joists
Wooden Ceiling Joists
Use of Metal Expansion Bolt
Drill hole.
Tap the metal expansion bolt.
Tighten the screw
with a socket wrench.
Correct
The metal expansion bolt is needed if installing to a concrete ceiling.
