17 SuperUser mode
FLUXUS G801
17.1 Activation/deactivation
145
UMFLUXUS_G801V1-0EN, 2020-06-26
17
SuperUser mode
The SuperUser mode allows an advanced diagnostic of signals and measured values as well as the definition of additional
parameters adapted to the measuring point, in order to achieve better measured values or for experimental work. Special
features of the SuperUser mode are:
• Default settings will not be used.
• There are no plausibility tests during the parameter entry.
• It is not checked whether the entered parameters are within the limits given by physical laws and technical data.
• The cut-off flow is not activated.
• A number of sound paths has to be entered.
Some menu items that are not visible in the normal mode are displayed.
17.1
Activation/deactivation
• Enter the HotCode
071049
.
• Press ENTER.
It is displayed that the SuperUser mode is activated.
• Press ENTER. The main menu will be displayed.
• Enter the HotCode
071049
again to deactivate the SuperUser mode.
It is displayed that the SuperUser mode is deactivated.
• Press ENTER. The main menu will be displayed.
Notice!
The SuperUser mode is intended for experienced users with advanced application knowledge. Changed parameters
can affect the normal measuring mode and lead to wrong measured values or to a measurement failure when a new
measuring point is set up.
SUPERUSER MODE\IS ACTIVE NOW
SUPERUSER MODE\IS PASSIVE NOW
Notice!
Some of the defined parameters remain activated after the deactivation of the SuperUser mode.