We reserve the right of changing these instructions without special prior notification
6
3.4. Connecting temperature sensors, room thermostat or external electrical controls
3.4.1. Accessing connection plate
In order to access connection plate (2) power connection protection cover (1) must be removed by unwinding two
M4 screws and pulling protection cover out. After connecting the power cable, protective cover (1) must be put in
place and tightened.
2
1
Accessing connection plate (15-24kW) Accessing connection plate (28-40kW)
3.4.2. Connecting sensors or room thermostat on connection plate
Temperature sensors
Connection plate (28-40kW)
Room thermostat
Connection board with relays (15-24kW)
