Flexiheat LEO L1, Техническая документация Руководство по эксплуатации

Страница: 3 / 14

LEO heaters make up a decentralised heating system. The air
streaming through the heat exchanger filled with hot water is warmed
up. Fan heaters are used for heating large volume buildings: general,
industrial and public buildings etc.
The casing of LEO heaters is made from extended polypropylene EPP.
LEO in special version ST has a casing made from powder coated steel.
The devices LEO in special version INOX have casing and air blades
made of austenitic stainless steel.
The devices are designed for indoor use where maximum air dustiness
does not exceed 0,3 g/m
3
. Units are built using copper, aluminum and
galvanized steel. It is prohibited to install units in the areas where
environment inside can causes in rusting. The devices can not be used
in an environment where there is oil mist.
Water heat exchanger could be supply by water or glycol solution up to
60%.
1. APPLICATION