FlexiForce 9700CARD, Руководство пользователя

Страница: 3 / 29

manual
www.fl xiforce.com
page 2
Ke ypad/Card reader
manual
www.fl xiforce.com
page 2
1. description of LED and buzzer indicators:
Description Red LED Green LED Buzzer
Normal mode ON
Program mode Flash
Under program mode ON
Non registered card ON Di (long)
Card only mode
ON with same dura-
tion of door open
Di Di (short)
Card and password
mode (after card
swipe, waiting for
password)
Red and green LED blink alternatively
Card and password
mode
Flash for each 0,5
second
Password only mode Flash for each second
Button tone Di (short)
Successful setup Di Di (short)
Faulty setup Di (long)
Invalid command Di (long)
Alarm mode Di Di Di (continuously)
Programming guide:
1. Get into programming mode:
Press #### : Red LED is OFF, Green LED is ON. Then press 123456#
Now Red should be off and Green should flash. If not: try again (provided the program password was not
modified before). Default program password is 123456.
2. Changing the program password:
Press 0 “new password” # “new password” # (new password must have 6 digits). Please beware this ac-
tion is only possible when in program mode (see step 1)
3. Adding cards with automatic number assignment
Press 1 - swipe card - # (only possible with unregistered cards!)
The 9700V12/24 will assign an individual card number to each registered card. If this is a new installation
the numbering of cards will start with 0001, 0002 etc. If this 9700V12/24 already has card programmed to it,
the next card will be assigned the next available number.
If the card you swipe is an already registered one you’ll hear a long warning signal (Di). You can still con-
tinue programming other cards.
4. Adding cards with specific number assignment
Press 2 - swipe card - “card number” # (repeat this step until the last card) #
If the card you swipe is an already registered one you’ll hear a long warning signal (Di). You can still con-
tinue programming other cards.
If the number you enter is already in use you’ll hear a long warning signal (Di). You can still continue by en-
tering another card number.