FlexiDrive MV-USB, Руководство пользователя

Страница: 5 / 8

www.floppyemulator.com 5
Connect the FlexiDrive unit
3
Rear View
Position Tag Description
1
DC INPUT Power supply connector 5V DC.
2
DATA BUS Bus to the FDC. Data Bus.
Standard 34 pins.
Optional FPC 26.
1. Turn off your machine/equipment.
2. Dismount your old Floppy Drive Unit.
3. Install the FlexiDrive in the same place by using the same connectors.
4 Pin Power connector
(Red cable +5vcc close to the data connector) don’t invert.
34 Pins Data cable connector
4. Power on your machine/equipment
5. The display of your FlexiDrive will show following:
1 2
+ 5 vcc
Led M: off
Led SD: off
Pin 1
Pin 2
Pin 34