Flexcom Communication Ltd
Installation and operating instructions (2021/09/02)
15/23
Cold
35-80 secs
Warm
35 secs
Restart immediately after turning off 1 sec
Operating time
The device is set at the factory to be so-called at rest. Switches to “sleep” mode. In this state, its
operating time is approx. 7 days. It switches from sleep mode to operating mode (“wake”) in the
event of an external influence (eg movement, vibration) or an SMS / TCP message. For use with
software, the operating time also depends on how often the device has been sent.
Frequency of data transmission Operating time
Every 5 seconds
? hours
Every 10 seconds
? hours
Every 1 minute
? days
Every 1 hour
? days
If the device is operated with SMS commands, the operating time is affected by the frequency of
issuing the commands (ie forcing the device to respond).
Normal operation of the device
The device can be operated in the following ways:
using the software service provided by the distributor and the SIM card together, in addition to
1.
the software service provided by the distributor but using his own SIM card, or
without the service provider's software service, with your own SIM card.
2.
The service provider provides a SIM card for the tracking device only if you subscribe to
the software service. In the case of unsolicited use of the software, the user must provide
the appropriate card with a data traffic limit (also).
With Distributor Software and SIM Card
In this case, you can receive the device in the ready state, no further settings are required to use it.
Separate software is available for setting or adjusting the operating parameters of the device, for
retrieving information or for using more advanced services (eg map route display, waiting and travel
points, diagrams, timetable, etc.). This is provided by the distributor in the form of a downloadable
application on a desktop and tablet browser on an Android mobile phone as part of a subscription
system.
Flexcom
