20 - Maintenance and cleaning of your Flexboat
20.1 – Hull and deck cleaning (Fiberglass parts)
The main care is with the gel coat
waterproofs and protects the hull. Washing the hull with fresh water whenever possible helps to conserve
it.
Once a year, it is recommended
safe option) or with mild soap, dry it thoroughly and apply a layer of high
surface of the hull. Afterwards, just polish it with a dry cloth.
water. Never use petrol, acetone
If the boat stays in the water, it is important to remove it periodically to clean the hull below the waterline.
Barnacles should be removed with a wooden scraper or plastic spatula, so as not to damage the gelco
or the bottom paint.
The inside of the boat also needs to be aired and cleaned frequently, especially if there are mattresses,
carpets, rugs, and other accessories that could become moldy.
- Gel Coat surfaces are slippery
- Be careful while applying the wax.
FIRE OR EXPLOSION HAZARD: Cleaning products may be flammable, explosive
and / or cause personal injury.
20.2 – Tube cleaning
Wash inflatable tubes with clean fresh water and neutral detergent. Use a soft brush to remove stains.
Clean the valves regularly with neutral detergent and a small brush. Do not use silicone,
petroleum based products.
If you purchase and use the Hypalon BLUE KIT for cleaning Hypalon, you will ensure the color and
extend the life of your Flexboat over many years.
Make sure the boat is completely dry before covering it during storage
Do not use plastic tarps as they do not breathe. The recommended ones are the acrylic tarpaulins.
20.2.1 Using the BLUE KIT to clean the Hypalon
In order to ensure the efficiency of the cleaning kit, we recommend that you follow the instructions
carefully and use appropriate safety equipment when handling the product.
STEP 1 - NEW MAGIC Cleaner (For frequent cleaning)
1. Spray the product on surfaces of 2 ft X 2 ft
2. Wipe with a soft brush or sponge
3. Rinse with clean water
4. Wipe dry with a soft cloth
Owner’s Manual – Small boats up to 10ft
Maintenance and cleaning of your Flexboat
Hull and deck cleaning (Fiberglass parts)
gel coat, a type of polyester based paint that forms the outer layer of the boat,
waterproofs and protects the hull. Washing the hull with fresh water whenever possible helps to conserve
recommended to wash the entire hull with water and mild detergent (dis
safe option) or with mild soap, dry it thoroughly and apply a layer of high-quality wax on the entire
surface of the hull. Afterwards, just polish it with a dry cloth. Remove stains using detergent diluted with
water. Never use petrol, acetone or any solvent based on Acetone or Toluol.
If the boat stays in the water, it is important to remove it periodically to clean the hull below the waterline.
Barnacles should be removed with a wooden scraper or plastic spatula, so as not to damage the gelco
The inside of the boat also needs to be aired and cleaned frequently, especially if there are mattresses,
carpets, rugs, and other accessories that could become moldy.
WARNING!
SLIPPERY SURFACES:
Gel Coat surfaces are slippery when wet. Take extreme care when walking on a
wet surface.
Be careful while applying the wax. Make sure your paths are not slippery.
FIRE OR EXPLOSION HAZARD: Cleaning products may be flammable, explosive
and / or cause personal injury. Read the cleaning instructions carefully before
use.
Wash inflatable tubes with clean fresh water and neutral detergent. Use a soft brush to remove stains.
Clean the valves regularly with neutral detergent and a small brush. Do not use silicone,
If you purchase and use the Hypalon BLUE KIT for cleaning Hypalon, you will ensure the color and
extend the life of your Flexboat over many years.
Make sure the boat is completely dry before covering it during storage.
Do not use plastic tarps as they do not breathe. The recommended ones are the acrylic tarpaulins.
.2.1 Using the BLUE KIT to clean the Hypalon
In order to ensure the efficiency of the cleaning kit, we recommend that you follow the instructions
lly and use appropriate safety equipment when handling the product.
NEW MAGIC Cleaner (For frequent cleaning)
1. Spray the product on surfaces of 2 ft X 2 ft
2. Wipe with a soft brush or sponge
3. Rinse with clean water
loth
Small boats up to 10ft
19
ester based paint that forms the outer layer of the boat,
waterproofs and protects the hull. Washing the hull with fresh water whenever possible helps to conserve
to wash the entire hull with water and mild detergent (dishwasher is a
quality wax on the entire
Remove stains using detergent diluted with
If the boat stays in the water, it is important to remove it periodically to clean the hull below the waterline.
Barnacles should be removed with a wooden scraper or plastic spatula, so as not to damage the gelcoat
The inside of the boat also needs to be aired and cleaned frequently, especially if there are mattresses,
Take extreme care when walking on a
Make sure your paths are not slippery.
FIRE OR EXPLOSION HAZARD: Cleaning products may be flammable, explosive
ng instructions carefully before
Wash inflatable tubes with clean fresh water and neutral detergent. Use a soft brush to remove stains.
Clean the valves regularly with neutral detergent and a small brush. Do not use silicone, grease or
If you purchase and use the Hypalon BLUE KIT for cleaning Hypalon, you will ensure the color and
Do not use plastic tarps as they do not breathe. The recommended ones are the acrylic tarpaulins.
In order to ensure the efficiency of the cleaning kit, we recommend that you follow the instructions