Flex QQ Extra 300, Инструкция по эксплуатации

Страница: 11 / 20

10
CONTROL DIRECTION TEST
Refer to the chart at right to determine the proper control
surface direction. Reversed controls may be corrected in
either the transmitter’s servo reverse menu or through the
Aura 8 app in the outputs section.
After any adjustments, repeat the flight control sensing
direction test, and the control direction test to confirm
that all control surfaces respond according to the correct
corresponding stick movement.
AILER
ON
R
UDDER
ELE
V
A
TOR
Transmitter
Command
Proper Control
Surface Deflection
Stick Left
Stick Right
Stick Forward
Stick Aft
Stick Left
Stick Right
LINKAGE SETUP
Adjust the control linkages so that the surfaces are neutral with zero trim and zero subtrim. Adjustments may be required during flight
trimming − for more information, please refer to the trimming section located on page 13 of this manual.
At the servo, the stock linkage attachment is a Z-bend located in the outermost hole in the servo arm for the rudder, the second hole in
from the outside for the elevator, and the third hole in from the outside for the ailerons.
At the control horn, the stock attachment is a nylon clevis located in the outermost hole for aileron, and innermost hole for rudder/elevator.
SER
VO ARMS
AILER
ONS
ELE
VA
TOR
RUDDER
CONTR
OL HORNS
AILER
ONS
RUDDER/ELE
VA
TOR