LD 18-7 125 R/LD 18-7 150 R
23
7. Increase the pressure to bring the
sanding pad into contact with the work
surface. In doing so, slew the renovation
sander with overlapping movements.
8. Sanding in corners:
– Switch off the power tool and wait
until the sanding tool has come
to a standstill.
– Pull out pivoted edge segment and
swivel to left.
– Switch on power tool again.
9. After work, switch off the electric power
tool and pull out the mains plug.
Brush ring
The guard features a brush ring. This ring has
two functions:
– As the ring projects above the surface
of the sanding pad, it is the ring which
comes into contact with the work sur-
face first. As a result, the sanding pad
is brought parallel to the work surface
before the sanding tool comes into
contact with the work surface.
This avoids a sickle-shaped depression
caused by the edge of the sanding pad.
– The ring retains the dust until it is extracted
by the dust extractor.
If the brush ring is damaged or excessively
worn, it should be replaced.
A replacement brush set is available from
any FLEX customer service centre.
Maintenance and care
t^okfkd>
_ÉÑçêÉ=éÉêÑçêãáåÖ=~åó=ïçêâ=çå=íÜÉ=ÉäÉÅíêáÅ=
éçïÉê=íççäI=éìää=çìí=íÜÉ=ã~áåë=éäìÖK=
Cleaning
t^okfkd>
aç=åçí=ìëÉ=ï~íÉê=çê=äáèìáÇ=ÇÉíÉêÖÉåíëK
Regularly blow out the housing interior
and motor with dry compressed air.
Clean the guard and pivoted edge
segment using dry compressed air.
Repairs
Repairs may be carried out by an authorised
customer service centre only.
klqb
aìêáåÖ=íÜÉ=ï~êê~åíó=éÉêáçÇ=Çç=åçí=äççëÉå=
íÜÉ ëÅêÉïë=çå=íÜÉ=ãçíçê=ÜçìëáåÖK=
kçåJÅçãéäá~åÅÉ=ïáää=ÇÉÉã=íÜÉ=Öì~ê~åíÉÉ=
çÄäáÖ~íáçåë=çÑ=íÜÉ=ã~åìÑ~ÅíìêÉê=åìää=~åÇ=îçáÇK
Spare parts and accessories
Other accessories, in particular insertion
tools, can be found in the manufacturer’s
catalogues.
Exploded drawings and spare-part lists can
be found on our homepage:
www.flex-tools.com
