H 1105 VE/H 1127 VE
20
Continuous operation with engaged switch
rocker:
`^rqflk>
cçääçïáåÖ=~=éçïÉê=Ñ~áäìêÉI=íÜÉ=ëïáíÅÜÉÇ=çå=
ÉäÉÅíêáÅ=éçïÉê=íççä=ïáää=ëí~êí=êìååáåÖ=~Ö~áåK
Push the switch rocker forwards (
1.
) and
engage by pressing the front end (
2.
).
Switch off the machine:
To switch off the power tool, release the
switch rocker by pressing the rear end.
Overload protection
If an extremely brief overload occurs, the
overload protection prevents damage to the
motor by automatically switching the device
off.
For further information on the manufacturer’s
products go to www.flex-tools.com.
Operating instructions
Do not place the grinding tool on the
workpiece until the power tool has reached
full speed.
To obtain a good grinding result, move the
grinding tool evenly over the surface which is
to be ground down. Do not apply excessive
pressure.
When the power tool is switched off, the
grinding tool continues running briefly.
The H 1105 VE can also be used as
a support grinder. For this purpose remove
the handle and clamp the power tool in an
appropriate device (clamping diameter
40 mm).
Maintenance and care
t^okfkd>
_ÉÑçêÉ=éÉêÑçêãáåÖ=~åó=ïçêâ=çå=íÜÉ=ÉäÉÅíêáÅ=
éçïÉê=íççäI=éìää=çìí=íÜÉ=ã~áåë=éäìÖK=
Cleaning
t^okfkd>
aç åçí=ìëÉ=ï~íÉê=çê=äáèìáÇ=ÇÉíÉêÖÉåíëK
Regularly blow out the housing interior and
motor with dry compressed air.
Clean the guard and pivoted edge segment
using dry compressed air.
Repairs
Repairs may be carried out by an authorised
customer service centre only.
klqb
aìêáåÖ=íÜÉ=ï~êê~åíó=éÉêáçÇ=Çç=åçí=äççëÉå=
íÜÉ ëÅêÉïë=çå=íÜÉ=ãçíçê=ÜçìëáåÖK=kçåJ
Åçãéäá~åÅÉ=ïáää=ÇÉÉã=íÜÉ=Öì~ê~åíÉÉ=
çÄäáÖ~íáçåë=çÑ=íÜÉ=ã~åìÑ~ÅíìêÉê=åìää=~åÇ=îçáÇK
