-16-
VACUUM HOSE PORT (FIG. 9)
Your tool is equipped with a vacuum hose port
for connection to vacuum / dust extractor hoses
with Ø1-1/4” (32mm).
Use a suitable vacuum extractor hose or use an
adapter, if necessary.
WARNING
Never allow a vacuum /
dust extractor hose to
interfere with the lower guard or cutting
operation.
SAW HOOK (FIG. 10)
Your tool is equipped with a hook. Use the hook
to hang the saw from a rafter or beam, or other
similar secure structure for temporary storage
during work breaks. Recommended lumber size
to support the saw with the hook: 2x4.
To use, pivot the hook to the right side until it
snaps into the open position.
When not in use, always pivot the hook back
until it snaps into the closed position.
WARNING
When the saw is hung by
the hook, do not shake the
saw or the object that it is hanging from. Do
not hang the saw from any electrical wires.
Make sure that the structure used to hang
the saw is secure. Personal injury or property
damage may occur.
Only use the hook for hanging the saw.
Using the hook to hang anything else could lead
to serious injury.
Do not use the hook to reach another object
or use the hook to support your weight in
any situation.
Fig. 9
Ø1-1/4″
(32mm)
Vacuum Hose Port
Fig. 10
Saw Hook in Open
Position
