ALi 10.8/ALi 10.8 G/ALi 10.8 S
18
– To close the chuck, rotate it clockwise.
n
Insert tools.
n
Close the chuck fully.
n
Carry out a test run to check that the tool
is clamped in the centre.
Tool holder (ALi 10.8 S)
Note
¼" screwdriver bits and ¼" bit holders
are held securely in the chuck.
n
Insert tool into the tool holder.
n
Pull tool lock forwards and press in the
tool all the way.
n
Release tool lock.
n
To remove the tool, pull tool lock
backwards.
Torque preselection
ALi 10.8:
ALi 10.8 G:
n
Set torque preselection to the required
setting (ALi 10,.8/ALi 10.8 G):
– 1 – 11 : Screw position (ALi 10.8)
or
– 1 – 20 : Screw position (ALi 10.8 G)
–
: Drill position
Notes
– The friction clutch is deactivated in the
drill position .
– At the correct setting the tool stops as
soon as the screw has been screwed in
flush.
Speed preselection
ALi 10.8 G:
n
Set selector switch to the required setting
(H = quick/L = slow).
Ali108_0420g07.book Seite 18 Montag, 27. August 2007 9:28 09
