manualshive.com logo in svg

FLENDER COUPLINGS N-EUPEX 3103en, Руководство по сборке и эксплуатации

Поделиться
Скачать
FLENDER COUPLINGS N-EUPEX 3103en Скачать руководство пользователя страница 24

Applicable standards

• If the coupling is intended for use under normal operating conditions, mill the parallel 

keyway according to DIN 6885/1 ISO JS9.

• If the coupling is intended for reversing operation, mill the parallel keyway according to 

DIN 6885/1 ISO P9.

• Mill the parallel keyway in coupling part 32 in accordance with DIN 6885/1 ISO P9.

• If you want to mill a parallel keyway that does not correspond to DIN 6885/1, please consult 

Flender.

5.1.3

Machining an axial locking mechanism

The coupling part is secured by a set screw or an end plate to prevent axial movements.

Please consult Flender if you want to use an end plate.

Note the following when using a set screw:

• Diameter and axial position of the tapped hole in the hub

• Position of the tapped hole with respect to the parallel keyway

• Selection of the set screw

Assembly
5.1 Preparatory work

Assembly and operating instructions  3103en

24

Edition 10/2020

Содержание COUPLINGS N-EUPEX 3103en

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды