Figure 7
21.
Recommended:
Apply a corrosion inhibitor to the
Chassis Harness pass through hole. (Figure 8)
Figure 8
22.
Insert RCA connector end of supplied Chassis
Harness through cab floor into cab.
(
Recommended:
Silicon or Grommet to seal off
hole.)
Connect & Secure Chassis Harness
23. Plug the RCA connector end of the supplied Chassis
Harness into Video In your display.
24. Route supplied Chassis Harness along existing
chassis harness toward rear of vehicle, staying clear
of body mounts. (Figure 12)
Figure 12
25. Connect supplied Chassis Harness to Tailgate Handle
Camera harness. Use supplied glued heat shrink
tube over RCA and Power connector to create seal
between chassis and camera harness. (Figure 13)
Figure 13
Connect Chassis Harness to Vehicle Wiring
26. Connect the supplied Chassis Harness Red and Black
leads as directed in the chart appropriate for your
vehicle below.
Chart A: Vehicles
Equipped with Factory 8.4” Touch Screen
Color Polarity Function
Location
Red
(+)
Ignition
Splice Red leads
to pink/yellow
wire in Cavity 19
of black under
dash Connector
I310 M adjacent
to parking brake
grommet
(Figures 2)
Black
(–)
Ground
Chassis ground
