Fleetwood 2012 American Eagle, Руководство пользователя

Страница: 92 / 110

Maintenance
10-4
EXTERIOR SEALANTS
Consult your Fleetwood RV Motor Home
Dealer for the most current sealant use.
Windshield
Window sealant
Roof sealant
DOOR, WINDOW, ROOF
COMPONENT AND MOLDING
RESEALING
Inspect the sealants around windows, floors,
joints and doors at least every three months.
Also inspect roof vents, other roof components,
moldings at front and rear caps, and perimeter
molding. If any of the following defects are evi-
dent during inspection, the affected areas must
be resealed.
• Sealant cracked or peeling.
• Void or missing sealant.
If you find any of the above defects:
1. Clean all areas to be resealed with an
appropriate cleaner and clean rags.
2. Make sure that all areas to be resealed are
absolutely dry before new sealant is applied.
INTERIOR
Fabrics
Interior appointments such as draperies, bed-
spreads, mattress covers, upholstery and wall
decorations are manufactured from high quality
materials and should be dry cleaned only.
Frequent vacuuming will keep them free of dust
and dirt. Minor spills should be cleaned up
quickly to avoid staining. The affected area
should be blotted, not rubbed, to prevent the
stain from working deeper into the fabric.
Avoid frequent washing of the window treat-
ments. Washing of these fabrics has the poten-
tial to remove the fire retardant material.
Solid Surface Top Care
(If Equipped)
The counter top is constructed of a solid surface
material that requires little care. Routine care
involves wiping the surface with a damp cloth to
remove water marks. For stains, wipe with soapy
water or non-ammonia based cleaners. Do not
use abrasive cleansers or steel wool.
Laminate Top Care
(If Equipped)
For cleaning laminate surfaces, uses mild dish-
washing liquid with warm water. Use a soft
cloth for both washing and drying.
Do not use abrasive cleaners, steel wool, or gritty
cleaners or damage will occur to the surface.
Walls and Ceiling Panels
The paneling and the ceiling of your motor
home may be any of several finishes and tex-
tures. Never use harsh detergents or abrasive
cleaners on walls or ceilings. Most surfaces will
clean with a soft cloth moistened with mild liq-
uid detergent in warm water, or a clear non-
ammonia window cleaner solution. Do not scrub
the surface or use large amounts of water which
could saturate the material. Simply spray or
apply the solution to the spot and blot with a
clean dry rag or paper towel. Aggressive scrub-
bing may damage the texture or pattern.
WARNING
Do not use lacquer thinner, nail polish remover, carbon
tetrachloride, spot remover, gasoline, or naphtha for
any cleaning purpose. These products may cause
damage to the material being cleaned, and may be
highly flammable or poisonous.
!
NOTE
Do not seal the bottom flanges of windows and doors.
Special gaps in the sealant have been intentionally
left in the bottom flange to provide drainage.