![FleetLynx AMG1000ALx-VCM Скачать руководство пользователя страница 14](http://html1.mh-extra.com/html/fleetlynx/amg1000alx-vcm/amg1000alx-vcm_installation-manual_2303558014.webp)
14
AMG1000ALx-VCM Light Duty/Passenger Vehicle Kit Installation Guide
Figure 14: AMG Diagnositics Page
Please note the following:
•
GPS reception is not expected to be optimal inside the service bay; it may be
necessary to move the vehicle outside and give the GPS device a few minutes of
satellite tracking time in order to get its lock.
•
A registered CDMA modem does not mean provisioned. Provisioning happens after
the modem is activated and is registered on a home network tower. Until the CDMA
modem is able to provision, it will not be able to establish an internet connection.
If the AMG Diagnostics page is not indicating the required status, please
call 1-877-955-3122 for installation assistance.
Once all of the required status indications have been confirmed on the AMG Diagnostics
page, re-install the dashboard.
Ensure that the AMG Serial Number shown here matches
the serial number of the unit currently being checked
The CAN bus will read as “No data” for light duty kit installations
The GPS antenna status MUST read
as “OK”
Either the GSM or CDMA
connection MUST read as
“Connected to the internet”
The GSM registration status MUST read as
“Registered on a cellular network”, otherwise
indicates a provisioning problem
The CDMA registration status MUST read as
“Registered on a cellular network”, otherwise
indicates a provisioning problem
If the brown Ignition Sensor wire (IGN_SEN) is connected, then this reading
MUST reflect the actual state of the ignition
The GPS signal status MUST read as “Valid”