Fleck 7000 Скачать руководство пользователя страница 4

Clean Water Systems & Stores Inc 7000 Meter Greensand Filter Programming Guide 2010 

VU  

 

Volume Used    

Displays the total volume of water treated by the unit 

RC  

 

Reserve Capacity  

Displays the system’s reserve capacity calculated from system 

capacity, feedwater hardness, and safety factor 

SV  

 

Software Version  

Displays the software version installed on the controller 

 
  
Some items may not be shown depending on timer configuration. 
 
The timer will exit Diagnostic Mode after 60 seconds if no buttons are pressed. 
Press the Extra Cycle button to exit Diagnostic Mode at any time. 
  

 

 

 

Содержание 7000

Страница 1: ...Cubic Meters if out of the U S Press the Extra Cycle button to go to the next step 2 Valve Type Display code VT Set to DF2b This means it is set for standard Downflow mode Press the Extra Cycle button to go to the next step 3 Control Type Display Code CT Set to Fd This is the Meter Delayed option This tells the Fleck 7000 control to meter or keep track of the amount of water used but then wait unt...

Страница 2: ...er sediment to keep the softener clean 9 Regeneration Time Display Code RT Set to 2 00 am generally or sometime when no water is being used and no other filter or softener is likely to be in a regeneration cycle Press the Extra Cycle button 10 Regeneration Cycle Step Times Use this display to set the various minutes of each cycle Some of the cycles will be set to 0 Do not set any of the cycles to ...

Страница 3: ... to 2 00 am generally or sometime when no water is being used and no other filter or softener is likely to be in a regeneration cycle Press the Extra Cycle button 4 Feed Water Hardness Use this setting to adjust the feed water hardness Set for 20 for most applications Press the Extra Cycle button 5 Fixed Reserve Capacity Display Code RC This allows you some reserve in case the softener meter has c...

Страница 4: ... the system s reserve capacity calculated from system capacity feedwater hardness and safety factor SV Software Version Displays the software version installed on the controller Some items may not be shown depending on timer configuration The timer will exit Diagnostic Mode after 60 seconds if no buttons are pressed Press the Extra Cycle button to exit Diagnostic Mode at any time ...

Отзывы: