4.1.3
Remove the 2 off fixing screws which hold the burner in position and the
9 off screws which hold the burner tray then lift vertically as shown
below in figure 31.
Fig. 31
4.1.4
Lift the burner engine out of the product, taking care not to damage the
burner unit or controls in the process.
4.2
Removing / Replacing the Valve Assembly
4.2.1
Remove the burner assembly as in section 4.1
4.2.2
Disconnect the thermocouple wires from the valve. Remove the main
pipe, inlet pipe and pilot pipe from the valve.
4.2.3
Remove the valve retaining screws and lift clear. Re-assemble in
reverse order and carry out a gas tightness test. Re-fit logs
as shown in section 3.
4.2.4
Close the door, check operation of the stove.
32
