●
Follow the general procedure for
Single monitor, serial controller
installation above,
auto detecting or selecting all the serial ports that you will use
●
The driver files will install. When the "Setup Complete" screen appears, you may
choose to run calibration (the Elo Video Alignment program, EloVA) immediately or wait
until later. If you choose not to run this program now, you can run it from the Elo Control
Panel application. When EloVA runs for the first time, it will attempt to calibrate all
controllers and/or serial ports that were installed. Press the Esc key on the keyboard to
terminate or skip calibration for any monitor, or allow the program to time out (as
indicated by the progress bar reaching maximum).
●
Silent Install
The EloSetup program for this driver may also be run as an attended or unattended
program from a command line, batch file, etc. Example usage
To Silent install for USB controllers use
EloSetup /iu /s
To Silent install for a Serial controller on COM1 use
EloSetup /is /P:1 /s
To view all the options available for this installation method, run EloSetup as EloSetup /h
●
Adding Additional Serial Controllers
Click on the
Change
option from the Add/Remove programs in the Control Panel, Elo entry
