manualshive.com logo in svg

Flashforge Waxjet 400, Руководство пользователя, Страница: 35 / 108

Поделиться
Скачать
Flashforge Waxjet 400 Скачать руководство пользователя страница 35

Chapter 7 After-processing Guide

The after-processing guide is the standard guide of remov-
ing FFMS3100 support. Please prepare some  The actual 
results may be somewhat different from the following 
process. Please prepare the items in the next column before 
the procedure. Also, make sure that the room where the 
execution is performed is well ventilated or that the ventila-
tion cover is placed.

1. Place the build plate on the heated platform of the magnet-
ic agitator. Remove the model one by one when the support 
material is softened.

2. Pre-configure three dissolved  solvents.
Dissolved solvent 1, which be used first and to wash 90% 
support wax.
(Ingredient，PPG400*1，alcohol*2，isopropanol*2, The 
pre-prepared solvent should be shaken well before use.)
Dissolved solvent II, used second to wash the remaining 
support wax in detail.
(Ingredient，PPG400*1，alcohol*3，isopropanol*3. The 
pre-prepared solvent should be shaken and mixed before use)
Dissolved solvent III, which be used to clean the remaining 
solvent.
（Ingredient，PPG400*1，alcohol*3，isopropanol*3)

3. Put the beaker and other containers on the magnetic stirrer; 
add dissolved  solvent I and turn on the heating to keep the 
temperature at 40 ℃; the temperature shall not exceed 43 ℃.

Note: there are a lot of thin printed objects on the 
build plate, please start heating from the all around to 
the center and remove the model carefully.

7.1 Support removal

Note: please twear protective mirrors, dust masks and 
rubber gloves before removing the support.

·  Magnetic agitators  
·  Isopropanol 
· The protective mirror 

· Beaker 
· PPG400
· Dust masks 

· The net basket 
· Waterless ethanol 
· rubber gloves

01

02

03

04

05

06 

07

08

09

10

11

12

13

14

15

16

17 

18 

19

20

21

22

23

24

25

26 

27

28

29

30

31

32

33 

34

35 

36

37 

38 

39 

40

41 

42 

43 

44

45 

46 

47 

48

49 

50 

51 

52

53 

54 

55 

56

57 

58 

59 

60

61 

62 

63 

64

65 

66 

67 

68

69 

70 

71 

72

73 

74 

75 

76

77 

78 

79 

80

81 

82 

83 

84

85 

86 

87 

88

89 

90 

91 

92

93 

94 

95 

96

97 

98 

99

100 

101 

102

103 

Содержание Waxjet 400













































































































Отзывы:

Нет отзывов