Hardware Assembly
05
1. Lift the filament cartridge out from the rear of
Inventor II, where you will place the filament
spool.
2. Insert the filament into the guide tube and
thread the guide tube through the filament
outlet. Place the spool of filament in the
cartridge.
3. Put the filament cartridge back.
4. Press the spring presser, and insert the
filament into the filament intake. Then release
the spring presser.
5. Connect power adapter with the power cable and then insert the power supply into the power
input on the back of the finder. Turn on the power switch and press the touch screen button to
turn on the printer.
