InventorIIS User Guide | www.flashforge.com
63
7.2.3
Print from USB Stick
①
Insert your USB stick with target .g or .gx file to your Inventor
Ⅱ
S.
②
Turn on the Inventor
Ⅱ
S. Make sure the build plate has been leveled and the
filament is loaded.
③
Tap
[Print]
and then tap the
USB
icon in the middle. The file(s) will be displayed
on the screen. Select the file you want to print and tap
[Print]
. The file will be
transferred to the printer.
⑥
And the printer will heat up the nozzle automatically and start to print after the
nozzle reaches the aimed temperature.,
Abort
：
To stop heating and printing. Once you tap
[Abort],
the process is irreversible.
Pause
：
To suspend the print job, you can tap it again to resume it. You can use this
function when you want to change the filament halfway.
7-11
