Should you encounter any problems, please feel free to email me at: [email protected]
22
The following dialogue box will then appear:
Click browse for left extruder; locate the folder
'examples'
found in its installation path
. (
In my case,
it is
C:\Documents and Settings\Administrator\My Documents\ReplicatorG\replicatorg-0040
,
different computers vary.) Then open the folder 'examples' select
Two_color_world_a.stl
as shown
below:
Repeat the process for the right extruder and select
Two_color_world_b.stl
as shown below:
Now you need to save it to the desktop with the suffix set to ".gcode."
Now click
Merge
, two dialogue boxes will then pop up.