Should you encounter any problems, please feel free to email me at: [email protected]
15
Setting the filament up
First, remove the filament guide tube from the extruder head.
When you have removed the guide tube you can remove the filament that is inside the guide tube.
To avoid any blockages during printing, please ensure that the two threads are loaded from the
middle. There are two wire trays, one runs clockwise and the other one runs counter - clockwise, as
shown below:
There are two ways of feeding the filament into the extruder head, one is using the LCD screen on
the printer itself and the other is by using the control panel on the Replicator G software.
Feeding using the LCD screen
1.
Start the machine, the display indicates:
▶
Build from SD
Preheat
Utilities