Flash LED PAR 56 SLIM RGB Aura F7000253a, Руководство пользователя

Страница: 2 / 4

LED PAR 56 Slim 18X3W RGB Aura F7000253a
www.flash-butrym.pl
1
1 INTRODUCTION
Thank you for purchasing LED PAR 56 Slim 18X3W RGB Aura. For safety reasons and to ensure the
trouble-free operation, carefully read the instructions.
2 SAFETY INFORMATION
1. Installation should be done by qualified personnel in order to minimize the risk of accidental
electric shock
2. Disconnect the power supply before installation.
3. Before connecting the unit to the mains, make sure it is not damaged mechanically. If you notice
any signs of damage you should contact your dealer immediately. Do not connect the device to
the mains.
4. Do not use the device in high humidity conditions and at temperatures above 40° C
5. The device must be installed on stable structures
3 PRODUCT INFORMATION
SLIM LED PAR 56 RGB Aura is a compact unit with bright LEDs (18x3W). Perfect for small stages, clubs or
discos. Applied cap provides a glow effect.
This model has a power output socket, allowing to connect multiple devices in series, using the cables
included.
3.1 Specification

Power consumption: 30W

Power supply voltage: 90 - 240V

Diode type: Standard LED

Number of diodes: 18

Diode power: 3W

Display: LED - 4 characters

Color: RGB

Dimming: Linear: 0 - 100%

Flash frequency (min): 1Hz

Flash frequency (max): 10Hz

Number of DMX channels: 7

DMX standard: DMX 512

Control interface: 4 buttons

Operating modes: Automatic, Sound controlled, DMX - Master, DMX - Slave

Features: Error correction, Reset, Automatic DMX 512 signal detection

Additional information: Pass-through sockets, glow effect

AC IN: IEC - C14

AC OUT: IEC - C13

DMX IN: XLR - 3 pin

DMX OUT: XLR - 3 pin

IP Rating: IP20

Housing made: ABS

Cooling: Active

Height [cm]: 23