USER MANUAL
©2019 Flash Technology, LLC
Page 4
Handheld Controller
– PAPI
1.3 Regulatory
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to radio communications;
however, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off or
on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna;
Increase the separation between the equipment and receiver;
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected;
Consult the dealer or an experienced radio/TV technician for help.
This Class [B] digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
1.4 Warranty Disclaimer
This manual will familiarize you with the features and operating standards of the product. Failure to
comply with the use, storage, maintenance, or installation instructions detailed in this manual could
void the user warranty.
Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment. Installation work must be done by a qualified
person(s) in accordance with all application local codes and standards.
