www.flash-butrym.pl
6
5
INSTALLATION
After removing the packaging, check if the device was not damaged during transport. Before connecting to
the mains, m
ake sure that the device is securely mounted. The manufacturer is not responsible for damage
caused by unstable mounting.
CAUTION!
Always use steel security cable to attach the device to a stable structure
.
Ensure proper connection to the mains and proper
grounding. Make sure that the electrical parameters are
consistent with device requirements. All activities, including connecting the device to the mains must be
performed by qualified personnel.
6
CONNECTIONS
The device is equipped with the following interfaces:
1.
DMX (in/out): XLR 3-pin
socket
2.
Power (in/out): powerCON
socket
6.1
Connecting DMX signal
The connection is performed using cable with XLR-female -> XLR-Male plugs.
6.2
Voltage specification
Input Voltage
Total Power
Frequency
100~245V
1200W
50/60Hz
6.3
Connecting power supply
The connection is performed using power cable with PowerCon connector (included).
