www.flash-butrym.pl
2
1
INTRODUCTION
Thank you for purchasing LED WASHER 12X30W WHITE. For safety reasons and to ensure the trouble-
free operation, carefully read the instructions.
2
SAFETY INFORMATION
1.
Installation should be done by qualified personnel in order to minimize the risk of
accidental electric shock
2.
Disconnect the power supply before installation.
3.
Before connecting the unit to the mains, make sure it is not damaged mechanically. If you
notice any signs of damage you should contact your dealer immediately. Do not connect
the device to the mains.
4.
Do not use the device in high humidity conditions and at temperatures above 40° C
5.
The device must be installed on stable structures
6.
Always use steel security cable to attach the device to a stable structure
7.
Do not connect power supply to more than 4 devices in series.
3
PRODUCT INFORMATION
3.1
Features
•
12 sections controlled separately by DMX
•
16-bit dimming resolution
•
Various dimming curves for smooth dimming in 8-bit mode
•
Dim delay (light bulb simulation)
•
Full DMX signal regeneration
•
Electronic protection against overheating
•
THEATRE or DISCO cooling volume modes.
•
Permanent color correction
•
Native support for optional wireless DMX module
3.2
Specification
•
Power consumption: 400W
•
Power supply voltage: 100 - 245V
•
Voltage frequency: 50/60Hz
•
Fuse: F7AL
•
Diode type: COB
•
Number of diodes: 12
•
Diode power: 30W
•
Display: Color LCD
•
Color: 4xWhite (2000K, 3000K, 4000K, 9000K)
•
Beam angle: 50°
•
Dimming: Linear: 0 - 100%
•
Flash frequency (min): 1Hz
•
Flash frequency (max): 20Hz
•
DMX standard: DMX 512
•
Control interface: 4 buttons
•
Operating modes: DMX512, Auto, Sound-controlled, Master / Slave
