Flash Furniture NAN-FSDC-01-SL-GG, Руководство пользователя

Страница: 10 / 15

6.Assemb e the protective guard (E).
Hang the hooks of the protective guard
(E) onto the holes in supports
Secure the protective guards (E) with
brackets (GG) with 4pcs screw 3/16” (HH).
Hardware Used
6
E
HH
GG
Bracket
x 4
x 4
HH Screw 3/16”
GG
5
To aid in installation
place black silicone
ring on the middle
plate and then
install glass tube.
Ensure the rim of
the glass tube sits
firmly in the black
silicone ring.
5. Carefully install the glass tube (C) by
lifting up and inserting through the center hole
in the top plate ass embl y (B). Ensure the black
silicone ring (F) is attached to the lower edge
of the glass tube (C) as illustrated. Slide the
glass tube (C) through the hole
of the lower plate cover and onto the middle
plate (J). Check and ensure that the glass
tube (C) is positioned properly and is
completely covering the center hole of
the middle plate(J).
WARNING! The black
silicone ring must be in place
prior to operating the heater.
BLACK SILICONE
RING
.........................................................................................................................................................................................