GPS-FilterBox 2.0 Manual | Introduction
3
Contents
1.
Introduction ...................................................................... 4
2.
Typical use ........................................................................ 5
3.
Overview .......................................................................... 6
4.
Installation ....................................................................... 7
4.1.
General ..................................................................... 7
4.2.
Output on/off switch ................................................ 8
4.3.
Typical use ................................................................ 9
5.
Configuration ................................................................. 10
5.1.
Standard configuration .......................................... 10
5.2.
Configuration options ............................................ 11
5.3.
Connecting to the GPS-FilterBox ............................ 12
5.4.
Reset to factory default .......................................... 16
5.4.1.
Reset using hardware ..................................... 16
5.4.2.
Reset using software ...................................... 17
5.5.
Firmware update .................................................... 18
6.
Technical Data ................................................................ 19
7.
Disclaimer ....................................................................... 20
8.
Limitations ...................................................................... 21
9.
Limited Warranty ........................................................... 22
4
Introduction | GPS-FilterBox 2.0 Manual
1.
Introduction
The GPS-FilterBox is a device that is able to convert baudrates and
filter GPS NMEA-sentences. The main purpose is to enable the ADS-
B functionality of any transponder without the need for an extra
GPS device. Instead existing devices like a FLARM can provide
position data.
Be sure to read and understand the entire manual before
proceeding!
