Flanders Scientific CM-170W, Руководство пользователя

Страница: 30 / 39

GPI Menu
GPI Menu Organization
This menu allows you to set 7 assignable functions for remote control via the GPI interface on the back of the
monitor (RJ-45 connector labeled GPI). Simply select one of the GPI slots, 1 through 7, and press enter to gen-
erate a list of available functions that can be toggled using the GPI interface.
30
© 2012 Flanders Scientific, Inc.
GPI Pin Assignment & Wiring
1 8
When looking at the GPI RJ-45 Connector located on the back of the monitor the pins are arranged 1 through 8
from right to left. This GPI interface is a contact closure based system and
PIN 5 is always the ground. The GPI
numbering on the GPI menu corresponds to the physical Pin assignments as follows:
Menu—RJ-45 Pin
GPI1—Pin 1
GPI2—Pin 2
GPI3—Pin 3
GPI4—Pin 4
GPI5—Pin 6
GPI6—Pin 7
GPI7—Pin 8
To prevent conflicts between menu toggles and GPI commands some features such as the marker selection
toggle must be set to GPI in their respective menus (i.e. Marker Menu) in order to function properly.
If using FSI’s GPI Keypad Lock to lockout the monitor’s keypad the Keyboard Locking function must be set to
GPI 1.
Back to Table of Contents
Main Menu
Function GPI 1 Keyboard Locking
Scopes & VU-Meters GPI 2 SDI 2 Input
Video GPI 3 Red Tally
Audio GPI 4 Green Tally
Marker GPI 5 UNDEF
System GPI 6 Toggle Back Light
Alarm GPI 7 DVI Input
OSD
GPI
Display Alignment
System Status
Support
GPI