Flamerite Fires 400 app, Установка, меры предосторожности и обслуживание

Страница: 4 / 11

4 | P a g e
The minimum opening size to inset your fire.
Model H W D
400 Manual/Remote 560mm 410mm 135mm
400 app 560mm 410mm 165mm
Verada 565mm 530mm 165mm
Atlanta 565mm 530mm 165mm
Verada & Atlanta 4 side wall mounted
The height at which you may wish to fix the fire in the wall is up to you, though we recommend anywhere
from 350-450mm from the floor to the bottom of the fire opening (not the bottom of the fire).
Hang on wall
•
The fixing rail should be fixed to the wall with the hooks facing upward and outwards.
• At the back of the case (bottom/centre) is a fold down tag. Fold this down to expose it under the fire.
• Once the rail is fixed in place, lift and hook the fire onto the rail.
• Mark off through the hole in the fold down tag. Remove fire and drill hole.
•
Hang the fire back on the wall and secure in place using the 35mm screw and rawl plug. This will
prevent the fire from being lifted off the hooks on the fixing rail.
Inset in wall
•
There must be enough clearance for the fire to comfortably fit into the hole. DO NOT SQUEEZE INTO
THE OPENING this may deform the case and stop the glass from moving correctly.
•
Secure into place using the fixings provided.
Flamerite suite
•
Be careful to protect the hearth and surrounding areas of the suite, inset from the front of the suite
with the fire front removed using the fixings provided.
Situ Screws Rawl Plugs
Hang on Wall 3x 60mm 1x 35mm 3x 50mm 1x 35mm
Inset in wall 4x 35mm 4x 35mm
Flamerite Suite 4x15mm N/A
400 Seris & Atlanta 3
• Being careful to protect the hearth and surrounding areas of the fireplace, inset from the front of the
fireplace with the fire front removed.
Installation Instructions
Please now test the fire and follow the rest of the instructions below.