We reserve the right to change designs and technical specifications of our products.
7
ENG
2.3 Safety symbols and stickers
The LogoTronic Hub OTC is marked with the following symbols:
1. in the lower left corner of the
transparent cover, the "High
voltage" symbol and the "Read
manual" symbol, see figure
2. on the inner cover plate to the
right of the fuse holder and the
word "FUSE": a sticker with the
inscription "2A T", see figure
3. Installation
The LogoTronic Hub OTC is supplied with a mains power cable which is connected to the LogoTronic
Hub OTC by a plug. The end of the cable to be attached to the mains is open and must be hard-wired.
The mains connection device is the three-pole connector, see Chapter 3.1 Item (A).
The mains connection device must be hard-wired. We recommend the use of a 3A fuse.
