Learning mode
As with other FLAJZAR receivers, the learning mode is started by pressing the PLUS and MINUS buttons
simultaneously for approximately 3 seconds to store or delete compatible bite alarms. After entering the
learning mode, the C (Channel) symbol and the channel number appear on the LED display. You can switch
between the channels by using the PLUS and MINUS buttons. If the channel is already taken, a decimal point
is indicated with the channel number.
Saving a new device
Press the PLUS and MINUS buttons to get to the corresponding channel. The new device is saved in the receiver’s
memory after transmitting with a bite alarm or accessories of the kit (ALF-NEON alarm, etc.). E (Error) is displayed
if the transmitter is already in the receiver’s memory. If a given position in the memory is already taken by another
transmitter, the E symbol and a decimal point light up.
Clearing the memory
Press the PLUS and MINUS buttons to get to the corresponding channel. Now, after pressing the MINUS button
(ca. 2 seconds), the corresponding channel’s memory is deleted. Deletion is confirmed by the channel number
flashing and the decimal point going out, together with the sound signalling with a deeper tone.
Ending the learning mode
The learning mode is ended every time a new device is learned or by pressing the PLUS and MINUS buttons
simultaneously.
Low battery
The receiver checks the battery status. A low battery is indicated by the decimal point flashing on the LED
display. The signalling warns a fisherman several hours in advance that the battery needs replacing. If you
want to maximise the battery life at this point, we recommend turning off the VIBRATION function (if turned on).
The FISHTRON RX MINI specifications
•
Supply voltage: 3V (2 AAA batteries)
•
Dimensions (H x W x D): 71 x 37 x 25mm
How to Reach the Kit’s Maximum Range
The kit’s range, the alarm – receiver, is up to several hundred metres in free space and up to 200 m on flat
surfaces. Any terrain inequality, shore, slope, buildings, cars or other obstacles limit the range. If the current
conditions and fishing conditions allow it, the alarm should be located at least 0.5 m above-ground (if you have
an extreme range requirement). Have the receiver with you and keep it in the top pocket or use a neck strap
(threaded under the stainless steel rod at the top of the receiver) if you want to reach the maximum range.
Don’t place the receiver or transmitter on metal objects. Both the transmitter and the receiver should have their
antennas upward. Despite the kit’s large reach, we encourage you to observe the Fishing Regulations and
don’t leave your fishing area at a distance greater than permitted by the Fishing Regulations. Always verify the
range at the location after installing the bite alarms.
Declaration of Conformity
The device complies with EU directives and has a Declaration of Conformity.
Post-Warranty Service
The post-warranty service is performed exclusively by the Czech manufacturer – FLAJZAR, s.r.o. We will
apply our maximum effort to help you solve every problem in the shortest possible time.
Содержание FISHTRON RX MINI
Страница 4: ......
