Flaircomm Technologies VV960, Руководство пользователя

Страница: 9 / 28

VV960 user manual
. 9
2. Using Your Handsfree
2.1 Battery Charging and Usage
2.1.1
Battery Charging
This device contains a rechargeable Li-Polymer battery. First-time charging time is about 4 hours. Later-on
recharging time is around 2-3 hours. Detailed charging procedures as follows:
1. Connect the car charger to the cigarette lighter.
2.
Plug the connector of the charger to handsfree’s charging port to start charging. Icon indicator “ ” will
blink during charging on the screen. Once the icon turns to “ ”, it indicates the battery is fully charged and
you should disconnect the charger from the handsfree and the power outlet.
You can also use the removable USB charging cable for charging the Handsfree speaker from your PC.
2.1.2 Battery Information
1. Once fully charged, the battery will support continuous talk time up to 6 hours and standby time about 550
hours.
2. When the battery is low, the device beeps once every 20 seconds and there is “Low Power” display in the
screen, charge the battery as described above.
Note that, over-charging will reduce battery life. If a fully charged battery is left unused, it will lose power over
time. Extreme temperature (either too hot or too cold) will also affect its ability to charge, capacity, and lifetime.
2.2 Mounting the Handsfree
This Handsfree device can be easily mounted inside the car by either using the companion Sun-Visor Clip to fix the
product on the sun-visor over the driver’s seat, or inserting the optional Vent Mount Clip into the vent in front of
the driver’s seat. As shown in Figures 2 and 3, there are two magnetic tips on the backside of the device. You can
attach the Sun-Visor Clip or the Vent Mounting Clip to them. For better mounting the device, please clip the Sun-
Visor Clip to the sun visor first, and then properly attach the device to the Sun-Visor Clip. To use the Vent
Mounting Clip, you may adjust the clip direction according to your car vent, as shown in Figure 4.
Note that, the microphone of the Handsfree must aim at the sound bearing.
Figure 2 Attach Sun-visor Clip to Magnetic Tips
Magnetic Tip
Sun-visor Clip