Flaircomm Technologies BlueTone BTSHS102, Руководство пользователя, Страница: 7 / 15

BlueTone
™
BTSHS102 User Manual
. 7
2. Using Your Stereo Headset
2.1 Battery Charging and Usage
2.1.1 Battery Charging
This device contains a rechargeable Li-Polymer battery. First-time charging time is about 4 hours. Later-on recharging
time is around 2-3 hours. Detailed charging procedures as follows:
1. Connect the travel charger to the power outlet.
2.
Referring to Figure 2, plug the connector of the charger to Stereo Headset’s charging port to start charging. Both
the Red and Blue LEDs will be on during charging. Once the Red LED turns off, the battery is fully charged and
you should disconnect the charger from the Stereo Headset and the power outlet.
Figure 2: Battery Charging
2.1.2 Battery Information
1. Once fully charged, the battery supports continuous working (listening/talk) time up to 10hours and standby time
about 600 hours.
2. When the battery is low, the Stereo Headset beeps once every 20 seconds and the Red LED gives 1 blink per 3
seconds, charge the battery as described above.
3. If the pressure of the battery is less than 3V, then Stereo headset will power off.
Note that, over-charging will reduce battery life. If a fully charged battery is left unused, it will lose power over time.
Extreme temperature (either too hot or too cold) will also affect its ability to charge, capacity, and life time.
2.2 Turn On/Off Stereo Headset
Turn on the Stereo Headset:
Long press K1, you will hear 2 power up tones, Blue LED gives 3 quick blinks then
Blue LED gives 1 blink per 3 seconds; Red LED is off. This indicates the Stereo Headset is power on.
Turn off the Stereo Headset:
Long press K1, you will hear 2 power down tones, Red LED will blink 3 times then
all LEDs are off. This indicates the Stereo Headset is power off.