BlueTone
™
BTSHS102 User Manual
.
11
1. Long press K2.
2. Refer to handset’s manual to initiate the connection from the handset side.
After disconnecting, Blue LED gives 1 blink per 3 seconds.
2.4.2 Call operations
2.4.2.1 Call
Before dialing, both your Stereo Headset and handset must be power on. And you also need to ensure your Stereo
Headset and handset has been linked with Bluetooth connection.
Answer Call:
Short press K2.
Reject Call:
Long press K4.
End Call:
Short press K2.
Redial:
Long press K3.
The Blue LED gives 3 quick blinks per 2 seconds and the Red LED is off.
2.4.2.2 Adjusting Stereo Headset Volume
In the talking mode
，
you can short press K3/K4 to increase/decrease your speaker volume. You can repeat the above
operation to speaker volume to a desirable level. The Blue LED gives 3 quick blinks per 2 seconds and the Red LED
is off.
Note
：
For most Bluetooth headset, Stereo Headset volume control will synchronize with the handset. That is, your
Stereo Headset volume can also be controlled your handset, vice versa. However, this may not be always true due to
variations on handset implementations chosen by different manufactures.
2.4.2.3 Mute
You can mute or un-mute an ongoing call by simultaneously quick pressing K3 and K4. The Blue LED gives 3 quick
blinks per 2 seconds and the Red LED is off.
2.4.2.4 Transferring Calls to/from Your Handset
Transferring calls to your handset: long press K2, Blue LED gives 1 blink per 3 seconds (For different handset, it
maybe shows Blue LED gives 3 quick blinks per 2 seconds
）
.
Transferring calls from your handset: short press K2, Blue LED gives 3 blinks per 2 seconds.
2.4.2.5 Voice Dialing
If your mobile phone supports voice dialing, you can make a call via voice dialing from your Stereo Headset. The
Blue LED gives 3 quick blinks per 2 seconds and the Red LED is off.
Voice Dialing
：
Long press K4, you will hear key tone, then follow your handset user guide to complete voice dialing.
Cancel Voice Dialing
：
Short press K4.