ASSEMBLY
Check for damage to the tool; parts or
accessories which may have occurred
during transport. Take the time to
thoroughly read and understand this
manual prior to operation.
This tool kit contains:
- 1 18V Cordless Shut off
Angle Tool
- 1 torque adjust tool
- 1 open end wrench (For Wrench)
- 4 marking color ring
- 1 instruction manual
Attaching or Removing Battery Pack
1. To connect battery, line up the
tracks and attach the battery pack.
Slide toward the battery pack until it
locks into position with a click.
2. To remove the battery pack, press
the red button on the top of the
battery pack and release the battery
pack.
- 8 -
OPERATIONS
This product had been carefully
inspected prior to leaving the factory.
It should provide you with years of
satisfying service under normal
operating conditions. Do not,
however, force the tool to perform
outside its design parameters. Such
usage will void the warranty.
1. Slide battery into the bottom of the
housing handle until a click sound
occurs. Do not force battery as it
should slide easily into place with
nominal force. Any difficulty doing
so would indicate an incorrect
alignment.
2. Tool speed can be adjusted by the
extra programmer.
(Purchase an additional
programmer)
3. Select a proper size drill/drive bit
and insert into the quick change
holder.
4. Depress the trigger to engage the
LED light and the tool starts to
work. Check the torque on the
digital tester to see if the desired
torque reached. If not, adjust the
torque to either tighten or loosen
the spring.
5. Make sure the tighten torque of the
bolts or screws before work. It may
vary due to different material you
tighten. When the torque is reach,
the tool will shut off automatically.
WARNING!
Read the manual
instruction before operating the
tool. Always wear safety glasses
or face-shields when operating
this product. Failure to do so can
result in dust, shavings or loose
particles being thrown into your
eyes.
1.
2.RELEASE
SLIDE
PRESS
