- 6 -
- 6 -
Do not store the machine and
battery pack in locations where
the temperature may reach or
exceed 50
o
C (122
o
F).
Do not incinerate the battery pack
even if it is severely damaged or
completely worn out. The battery
pack can explode in a fire.
Be careful not to drop, shake, or
strike the battery.
Do not charge inside a box or
container of any kind. The battery
must be placed in a well
ventilated are during charging.
Do not dispose of battery packs
into household waste, fire or
water. Battery packs should be
collected, recycled or disposed
of in an environmentally-friendly
manner. Call the authorized
warranty centers for places to
dispose of damaged or inoperable
batteries.
FUNCTIONAL DESCRIPTION
FOR WRENCH
This industrial shut off wrench is
designed for nut tightening/loosening
and screw driving/loosening. It is not
appropriate to use for wood/mild
steel drilling. Please refer to the
figure on this page to familiarize
yourself with the major components
of this tool before use.
1. Power Switch
Depressing the power switch will
energize the LED light
(2)
in front
and the tool starts to rotate. When
released, power to the motor will
cease and the tool stops to work
immediately. But the LED light will
remain for 5 seconds then off.
3. Forward/Reverse Button
The tool is always in forward
operation unless the Forward/Reverse
button is pressed. When the button
is pressed, the blue LED shows
and the tool will be in reverse
operation. To get the tool back in
forward operation, just simply press
the button again and the blue LED
would disappear and the tool is
back in forward operation.
4. Anvil (Drive Shaft)
The anvil will accept drive hex
socket. Be sure the socket is fully
inserted before operating tool.
Otherwise, the socket may fly off and
cause property damage or personal
injury.
5. Angle Head
Adjust the angle head kit to the
degree you wished. (a 45
o
as one
position, total 8 positions for angle
adjustment).
6. Torque Adjustment Cover
Open the torque adjustment cap.
Use the torque adjustment tool to
either tighten or loosen the spring
until the desired torque is reached.
7. Li-ion Battery
This battery provides electrical power
to the motor. Please charge it
according to the charging instruction
listed in this manual.
WARNING:
Use the tool to either
tighten or loosen nuts and screws
ONLY in stipulated torque and voltage
ranges.
5
6
2
4
3
1
7
