QUICK START GUIDE
What’s Included:
1) Lever
2) Lever Assembly
3) Pressure Gauge
4) Plunger Stem
5) Lever Hook
6) Plunger (in Brew Cylinder)
7) Brew Cylinder
8) Brew Base
9) 58mm Portafilter
10) Base
11) Controller for Preheat System
12) Drip Tray
13) Tamper
14) Preheat Cap
15) Power Supply (not shown)
1)
3)
4)
5) 6)
7)
8)
10)
12)
13)
11)
14)
Achieving well-balanced espresso with the Flair 58 is a combination of the
right grind
, the
right
pressure
, and the
right brewing time
.
Everything starts with the grind and dose, which creates the resistance to achieve desired pressure and
brewing time. “Flair-istas” who have mastered their technique will brew between 6 and 10 BAR at a time
between 30-35 seconds. Your Flair 58 comes with a pressure gauge to ensure your espresso is to your
specifications at all times. Please use the chart below to help you dial-in.
BREW TIME
PRESSURE
Less Than
30
Seconds
30-35
Seconds
More Than
35
Seconds
Grind
More
Fine
Grind
More
Fine
More
Pressure
Grind
More
Fine
Target
Brew
Range
Grind
More
Coarse
Grind
More
Coarse
Less
Pressure
Grind
More
Coarse
1-5 BAR
6-9 BAR
10-12 BAR
DANGER!
ST
OP & DISCARD GROUNDS
>12 BAR
Using Your Pressure Gauge
Don’t break your pressure gauge.
Never brew in the Black!
Cleaning & Troubleshooting Your Flair 58
28 Hammond Street, Suite B
Irvine, CA, 92618 USA
© Intact Idea, All Rights Reserved
Flair is a trademark of Intact Idea, LLC. Product designed in California, USA - Made in China
1.
Remove plunger by pulling out with stem while
brewing cylinder is installed on base.
3.
For more thorough cleaning, place a cup beneath your Flair
58 and flush with cool water before wiping.
2.
Use damp cloth to wipe the inside and bottom of the
brew head. Also wipe the plunger.
Learn faster by watching our video tutorials online at:
www.flairespresso.com/learn/tutorials
For troubleshooting write to us at:
For warranty, upgrades and all other info, visit:
www.flairespresso.com
2)
When managed correctly, your Flair 58 will need minimal cleaning. Always ensure that your Flair 58’s
Preheat System is off and your brew head has cooled before cleaning. Never immerse or wash the entire
brew head in water. See our attached
“Safety and Instructions Guide”
for more.
No Soap Needed!
Keep Outside
Surface &
Wires Dry!
9)
