I.
III.
II.
V.
IV.
4
5
2
3
1
2
3.
1.
2.
A.
B.
30 cm
30 cm
60 cm
A.
B.
60 cm
> 1s
> 1s
1.
2.
36
ENGLISH
GB
Description
Assembly
I.
II.
1
Luminaire 10478526 (60 cm)
2
Connection cable
3
Luminaire 10478528 (30 cm)
4
4x Screws
5
2x Mounting bracket
1.
Select an installation location at your cabinet. Make sure that the distance
between the luminaires can be covered by the connection cable
2
.
Mark the holes of the mounting brackets
5
with the required distance and
drill the holes (see technical data). Make sure that the brackets
5
are on the
same level.
2.
Fix the brackets
5
in place with the screws.
3.
Clip the luminaire into the brackets
5
.
Luminaires described in this manual are extensions for luminaires
10478529 and 10478527
37
ENGLISH
GB
Connection
III.
Cleaning
1.
Disconnect the power supply cord from the power outlet.
2.
Wipe the luminaire with a soft, dry cloth only. Never use scouring
powders or chemical cleaning agents. Never allow the electrical
components to become damp.
A.
Switching on/ off
Turn on and off with a swiping gesture over the sensor button.
B.
Adjusting the brightness
Let your hand stay over the sensor button for more than 1 second. The
brightness of the luminaire will increase.
Move your hand away and again let it stay over the sensor button. The
brightness of the luminaire will decrease. The brightness setting is saved
until a new setting is set.
Usage
Maintenance and care
IV.
V.
Caution:
A driver can run max. 1 luminaire and 1 extension at the same time.
Connect the luminaires with the connection cable
2
:
A.
10478528 (30 cm)
Extension for luminaire
10478529(30 cm)
B.
10478526 (60 cm)
Extension for luminaire
10478527 (60 cm)
