Step 3: VR headset set-up
1. Remove the VR headset - Pico neo2 Head Mounted Display from the case.
2. To power on the VR headset, hold down the power button (on the top right side of
the headset for 2 seconds).
3. Put on the VR headset. Ensure it is fitted firmly. To tighten the fit for the user,
the VR headset can be adjusted at the back via the adjustment knob and on top
of the head using the strap.
4. The VR headset is
ON
when you see the Pico neo2 logo.
5. The user now needs to adjust the lens on the base of the VR headset to improve
the visual clarity.
Step 4: Powering on the Extinguisher controller tracking system.
• Short press the HOME buttons (Figure 6 and Figure 7) to wake up the two
controllers.
• Long press the HOME button for 6 seconds to turn off the controllers.
• There is no requirement to shut-down, as the controllers will automatically
go into sleep mode when not in use.
Figure 6:
Controller home
button (nozzle)
Figure 7:
Controller
home button
(trigger)
7
Содержание Extinguisher
Страница 1: ...Copyright 2020 September 2020 FLAIM Extinguisher User Manual flaimsystems com info flaimsystems com ...
Страница 16: ...Figure 16 PASS Technique Aim Figure 15 PASS Technique Pin 15 ...
Страница 17: ...Figure 17 PASS Technique Squeeze Figure 18 PASS Technique Sweep 16 ...
Страница 20: ...flaimsystems com info flaimsystems com Copyright 2020 ...