FLAIM Systems Extinguisher, Руководство пользователя

Страница: 7 / 20

Step 1
Step 2
1. Plug the micro USB lead into the USB port on
your television and projector.
2. When powered, the receiver power light will
glow blue (see Figure 4).
The USB Power supply delivers power to
the HDMI receiver. Some TVs/Monitors/
Projectors cannot supply enough power from
their in-built USB port. If there is no light it is
likely that your system cannot supply enough
power from its in-built USB port. If this
occurs, please use the included power supply
connected to a power outlet. Retry with power
supply connected – you should now see a blue
light on the power receiver (see Figure 4).
1. Select the source – television or projector
You will now see the Ready to Connect screen
(Figure 5) on your television or projector. If
the system is inactive for five minutes or
longer a screensaver will activate (Figure 6).
Figure 4: Ensure HDMI receiver is powered
(Blue light) – top right
Figure 5: HDMI Receiver ready to connect screen
Figure 6: HDMI Receiver screensaver mode
6