The swing comes assembled out of the box; no assembly necessary. If it becomes necessary to
disassemble the swings, the following steps should be followed:
•
Remove the elastic bands / spring connectors from the chains.
•
At one end of the aluminum support structure (tube) where there is an opening in the
fabric, push the tube down until it can accessed through the opening.
•
Grasp the end of the tube with one hand and the upper part of the swing in the other.
Carefully pull the tube out of the swings pocket; feeding both chains through their
individual openings as the tube is being pulled out. See Figure One. After removing the
tube, set it aside. Repeat for the other side.
•
To reassemble, just reverse the above steps. The tube is easier assembled if the chains
are inserted first into the tube opening. Push the chains ahead of the tube and up
towards the chain openings.
Figure 1
CLEANING
Both layers / types of materials can be spot cleaned with water based products. The micro
suede pillow cover (zippered) is removable. The pillow is moisture resistant. Do not soak the
micro suede fabric, as it can cause water spots that are difficult to get rid of. After spot cleaning
the micro suede, the material can be brushed to raise the nap.
There are several sites on the internet that give more detail on cleaning micro suede and woven
nylon.
601 FlagHouse Drive | Hasbrouck Heights, NJ 07604 | 800.793.7900 | flaghouse.com/haleysjoy
235 Yorkland Boulevard | North York, ON M2J 4Y8 | 800.265.6900 | flaghouse.ca/haleysjoy
