14.
Care and Maintenance
Use and store in dry environments and moderate climates
only. Avoid excessive heat, humidity, dust and vibration.
Unplug before any cleaning and servicing.
Do not attempt to take the projector apart.
To clean the focusing lens, use a soft tissue or lens cloth with
a little methylated spirit or pure alcohol.
Do not attempt to service this projector unless you are
qualified to do so and you are working under the direction of
the manufacturer.
Pull the plug to disconnect from the mains – do not pull the cord to unplug the
projector.
15.
Troubleshooting
Should you need to contact us about this product, please have the serial number to hand.
This can be located as indicated below:
Further copies of these instructions can be downloaded at www.rompa.com
We hope you find our instructions invaluable. If you have any suggestions for improving
them further your comments will be greatly received – please contact us at
Aura Projector 22662, May 2019
Copyright ROMPA® Ltd
