11.
Safety
Always supervise the use of this product
.
Install indoors in a dry environment.
Do not use if the power cord is damaged or if the projector has been dropped.
12.
Technical Specification
Power supply:
9V AC 6W
Size:
20 x 20 x 20cm
Weight:
889g
13.
Installation
1.
Choose a suitable location for the projector, making sure that the power cable will
not be tripped over, pulled or come into contact with hot surfaces. If an extension
cord is necessary, a cord with a current rating at least equal to that of the appliance
should be used. Cords rated for less amperage than the appliance may overheat.
2.
Mount the projector using the table stand (foam ring) provided
or wall-mount. The wall mount should be screwed to a
wall in a vertical position so that it supports the bottom
and top of the projector. Fittings are provided.
Please note: when wall mounting, the safety cord should
be fitted to the projector. To do this, attach the spring clip
on the safety cord onto the side of the projector.
3.
Install the supplied effect wheel. This has a magnetic
attachment – the slide on the left of the magnetic adapter
should be at the top as shown. Position the magnetic wheel
onto the magnetic adapter on the projector. To remove the
wheel simply lift it off.
